3D Printer Nema 17 Stepper Motor 59Ncm(84oz.in) 2A

Description

Description This is high torque Nema 17 stepper motor with 1.8° step angle (200 steps/revolution). Each phase draws 2A, allowing for a holding torque of 59Ncm(83.6oz.in). It's good ideal for 3D printers, as well as CNC and robotics applications. The motors are supplied with a 1 metre long power cable with a 4-pin 0.1" pitch (2.54mm) Harwin female connector already fitted. Electrical Specification Manufacturer Part Number 17HS19-2004S1 Motor Type Bipolar Stepper Step Angle 1.8° Holding Torque 59Ncm(83.6oz.in) Rated Current/phase 2.0A Phase Resistance 1.4ohms Recommended Voltage 12-24V Inductance 3.0mH±20%(1KHz) Physical Specification Frame Size 42 x 42mm Body Length 48mm Shaft Diameter ?5mm Shaft Length 24mm Double D-cut Length 15mm Number of Leads 4 Lead Length 1000mm Weight 390g Connection Wire Color Black Green Red Blue Board Connector A C B D Custom Options Connectors : Molex, Harwin, Tyco/AMP, JST etc. Lead wires & cables : Special lengths, Protective hose Shaft : Round, D-Cut, Cross drilled, Key-Way, Thread or Hollow Resources Full datesheet about 17HS19-2004S1: OSM Datasheet Make sure the motor connect to a constant current or chopper drive controller before you test motor. Connecting the motor directly to a power supply will destroy the motor