128x128, General 1.5inch RGB OLED display Module, 16-bit high color

Description

1.5inch RGB OLED display module, 128x128 pixels, 16-bit high color, SPI interface Overview This is a general RGB OLED display Module, 1.5inch diagonal, 128x128 pixels, 16-bit high color (65K colors), with embedded controller, communicating via SPI interface. Features 128x128 high resolution, 65K colors, clearly displays colorful images Supports 4-wire SPI OR 3-wire SPI interface, configured via onboard resistor Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32) Specifications Driver: SSD1351 Interface: 4-wire SPI, 3-wire SPI Display color: RGB, 65K colors Resolution: 128x128 Viewing angle: >160° Operating voltage: 3.3V / 5V Dimension: 44.5 x 37 (mm) Interface SYMBOL DESCRIPTION VCC Power (3.3~5V input) GND Ground DIN Data input CLK Clock data input CS Chip selection, low active DC 4-wire SPI: Data/Command selection (high for data, low for command) 3-wire SPI: Connects to GND, keeps low RST Reset, low active There are two available drive interfaces for this RGB OLED module: 4-wire SPI (default) and 3-wire SPI: BS DC 4-wire SPI 0 DC 3-wire SPI 1 Connects to GND Dimensions Development Resources Wiki : www.waveshare.com/wiki/1.5inch_RGB_OLED_Module Weight: 0.02 kg 1.5inch RGB OLED Module x1 PH2.0 7Pin x1 1 2