1200x825, 9.7inch E-Ink display HAT for Raspberry Pi

Description

DESCRIPTION 1200x825, 9.7inch E-Ink display HAT for Raspberry Pi, IT8951 controller, USB/SPI/I80/I2C interface Overview This is an E-Ink display HAT for Raspberry Pi, 9.7inch, 1200x825 resolution, with embedded controller IT8951, communicating via USB/SPI/I80/I2C interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on. Features No backlight, keeps displaying last content for a long time even when power down Low power consumption, basically power is only required for refreshing Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ USB/SPI/I80/I2C interface, for connecting with host boards like Raspberry Pi/Nucleo, etc. Comes with development resources and manual (examples for Raspberry Pi/STM32) Specifications Operating voltage: 5V Interface: USB/SPI/I80/I2C Outline dimension: 218.8mm × 156.425mm × 1.15mm Display size: 202.8mm × 139.425mm Dot pitch: 0.169 × 0.169 Resolution: 1200 × 825 Display color: black, white Gray scale: 2-16 (1-4 bit) Full refresh time: <1s Total refresh power: 0.6W(typ.) Total standby power: 0.3W(typ.) Viewing angle: >170° SPI Pinouts SYMBOL DESCRIPTION 5V Power input GND Ground MISO SPI MISO pin MOSI SPI MOSI pin SCK SPI SCK pin CS SPI chip selection, low active RST External reset, low active HRDY Busy status output, low active e-Paper IT8951 Driver HAT Dimensions Development Resources Wiki : www.waveshare.com/wiki/9.7inch_e-Paper_HAT Weight: 0.13 kg 9.7inch e-Paper x1 e-Paper IT8951 Driver HAT x1 9.7inch e-Paper Adapter x1 33PIN FFC (same side contact) x1 RPi screws pack (2pcs) x1 PH2.0 20cm 8Pin x1 1 2+3+4 5 6